pipe repair kits
no dig localised repair of sewers and drains,
from 70mm to 525mm internal diameter.
SSD Pipe Repair Kits together with SSD packers provide a reliable and cost effective system for the permanent and watertight localised repair of sewers and drains by the no-dig technique. By eliminating the need for costly and often disruptive excavation these kits save the contractor time and money.
Each kit contains all the materials required for a single repair and by reducing both preparation time and wastage is a cost effective alternative to purchasing materials in bulk.
kit contents
- 2 part resin in separate bottles for ease of mixing and use
- Fibreglass mat
- 2 packer protection sleeves
- Protective groundsheet
- 2 pairs protective gloves
- Spreader
- Cable and wire ties
benefits
- Minimum disruption due to no-dig application
- Quick and easy to use
- Permanent and watertight repair
- Reduces preparation time and wastage
- Pre-measured components ensures accurate mixing of resin
- Elimination of resin mixing buckets and measuring cylinders
- System has German DIBt Approval
- 50 year projected lifespan for the completed repair
applications
- Repair of cracked, fractured and broken pipes, including clay, concrete, pitch fibre, asbestos cement, cast iron and PVCu pipes.
- Repair of pipe joints damaged by root intrusion or ground movement
- Bonds to most pipe materials
materials
resin
The resin is supplied in two grades for winter use, ambient temperature 5ºC to 20ºC, and for summer use, ambient temperature over 20ºC. It is a two-component epoxy resin developed specifically to impregnate glass fibre matting for the internal repair of sewers and drains.
- Low viscosity, ideal for the repair of sewers and drains exposed to constant humidity
- Resistant to the range of acids and alkalis normally found in sewers and drains
- Good adhesion to damp pipe surfaces
- Can be used most pipe materials including, clay, concrete, pitch fibre, asbestos cement, cast iron and PVCu
- Harmless once cured
fibreglass
The matting is made from Owen Corning’s Advantex glass fibre material. This is a boron free E-glass with significantly improved resistance to the corrosion effects of a range of environments. In all aqueous environments tested to date, the Advantex glas reinforced composite materials have provided better corrosion resistant performance than similar materials with traditional E-glass.
installation products
SSD also supply a range of products to help the contractor to install the pipe repair kits. These include starter kits for the contractor new to no-dig repair.
- Lateral Packers DN70 to DN600 up to 5000mm long
- Flexible Wheeled Packers DN100 to DN1200 up to 5000mm long with by-pass from DN150
- Air Push Rods 1.5m long
- Lockfast Drain Rods
- Hose with series 26 couplings
- Oil free Compressor 25l
- Compressor Controllers 1.5 and 2.5 bar
- Regulator with pressure gauge and shut off valve
bulk products
All components of the pipe repair kits can be supplied in bulk if required.
